Decorating a house is not an easy task. You have to consider the overall decoration effect of the house, how to buy ceramic tiles, how to choose ceramic tiles, and how to purchase ceramic tiles in a specific location. It is too difficult for me. In fact, there is no need to use Zhongtao Jun said that everyone already knows it very well. So, when buying ceramic tiles to decorate a house, many people will ask How to remove the release agent on the back of the ceramic tiles. Should it be removed? Then let’s find out together!
Maybe many people don’t know much about release agents, so I asked Du Niang, hahaha, let’s take a look together! ! !
1. What is a release agent
Mold release agent is a functional substance between the mold and the finished product. Release agents are chemically resistant and will not dissolve when in contact with the chemical components of different resins (especially styrene and amines). The release agent also has heat and stress resistance and is not easy to decompose or wear; the release agent adheres to the mold without being transferred to the processed parts, and does not hinder painting or other secondary processing operations. Due to the rapid development of injection molding, extrusion, calendering, molding, lamination and other processes, the dosage of release agents has also increased significantly. The white stuff is the release agent on the tiles.
2. How to remove the release agent on the back of ceramic tiles
There is a special tile release agent and cleaning agent that can be wiped with a cloth. First put a little of the cleaning agent on the tile, then wet it with water, then find a clean cloth and clean it. .
1. Add 2%-8% of the product to clean water to dilute it before use. Please wear rubber gloves when operating. Use a floor mop or towel to pick up this product and wipe it. You can get satisfactory results. You can also soak the tiles in diluted cleaning agent for 3-5 minutes.
2. Finally, rinse with clean water.
3. Tile bright cleaning agent is an acidic, easy-to-rinse, phosphorus-free, green and environmentally friendly tile cleaning agent. It is widely used for cleaning and brightening exterior wall tiles and floor tiles. It can effectively remove gypsum, rust, yellow spots, black spots, stubborn stains, oil stains and other dirt on their surfaces. It has fast cleaning speed and can quickly restore the true color of the tiles. It also has the functions of sterilization, It has anti-mildew effect and can effectively increase the coefficient of static friction to prevent the floor from slipping.
3. What are the construction methods of tile adhesive?
1. Clean the construction surface first, and keep the surface solid, dry, clean, and free of stains.
2. Stir the tile glue into a paste in clean water. The ratio is 25 kg and about 6 to 6.5 kg of water. After stirring fully, wait for about ten minutes and then stir slightly before use. After use in about 2 hours, do not use it.Reuse the dried glue.
3. Apply the glue on the wall with a toothed scraper and spread it evenly over about one square meter. Knead the tiles on it for fifteen minutes or so. If adjustment is needed, it must be done before the tile adhesive is fixed.
4. Pay attention to retaining the expansion joints. The product is suitable for use in an environment of 5℃ ~ 40℃. You can only step in or fill the joints after 24 hours.
The above content is the article Zhongtaojun shared with you about How to remove the release agent from the back of ceramic tiles! It seems like a simple operation, but I don’t know if you in front of the screen have learned it yet. I smile evilly. Hahaha, don’t say that you think you know it. I want me to think it, not what you think. Hahaha, let’s all use common sense anyway! Or, you can see if the decoration master also operates in this way during operation. Hahaha, you can also supervise. That’s it for today’s content sharing. Zhongtaojun is moving bricks!
